Thanks George,
I would like to get the finish tape, the double sided tape and some foam tape if at all possible. Are there a few alloy brackets that strenghten the root rib8 and r3 ? I would like to source those parts and the nose cone backing plates if possible and a few hundred avax rivets as a back up.
( I found no. 30 'rivet' drill bits double ended at $ 6.50 per pair ,thats $1.60 per drill or $33.00{35.00 US $} per 10pk thats 20 drill tips on 10 sharfts)
also the pic attached there is a roll of tedlar tape but it was sourced from green house builders supply, I am not sure of the brand do you recognise the writing/roll ? I will not use this as I can't be sure of its origin.
manythanks wayne